lefttrades.blogg.se - Alula app manual

#Alula app manual how to
#Alula app manual install
#Alula app manual full

PRO-TIP: The Alula Video Doorbell button will start red, then flash blue. Turn the power back on at the circuit breaker.

#Alula app manual install

Install the Alula Video Doorbell to the mounting plate using the two mounting screws provided in the box.PRO-TIP: If you didn’t have an existing chime, you need to install the fuse. Note: The polarity is not important unless you have a second doorbell elsewhere in the home. Wire the Alula Video Doorbell to the chime wire using the U-shaped wires.Depending on the position of the doorbell and the front door, install the provided flat or angle plate and make sure that it is level.Drill holes at the marked points and insert the plastic anchors.Using a pencil or marker, mark the drill points on the leveling plate.Remove the existing doorbell button with a screwdriver.

#Alula app manual how to

How to replace an old doorbell with the Alula Video Doorbell

Mount the power kit to the chime’s molding.

Connect the chime’s wire to the wire harness.

Connect the new wire harness to the chime’s terminals.

PRO-TIP: if you have a backdoor chime, leave it connected as is.

Remove the existing chime wires to the terminals labeled “front” and “trans.”.

Remove the cover from the home’s chime.

Connect the wire harness power kit to the.

Unbox the Alula Video Doorbell and locate the wire harness power kit.

If there’s no existing chime, skip to step 17.

Check whether the home’s chime is a mechanical or electronic chime.

How to install the chime for the Alula Video Doorbell

Before getting started, shut off the power to the doorbell at the circuit breaker.

If fewer than 16 volts, you may need to replace the transformer.

Using the voltage meter, test the voltage at the existing doorbell to confirm that it is at least 16 volts.

Press the button on the existing doorbell to make sure that it rings and there is power to the doorbell.

You should have the following tools on hand:.

What to do before installing the Alula Video Doorbell Doorbell live view will automatically be displayed when the doorbell button is pressed.These steps will show you how to replace an existing doorbell with the Alula Video Doorbell Live view, clips, and event notifications are supported. Cameras can be viewed directly from the touchpad. Using the RE667W-R-PRO touchpad, zones can be bypassed or activated. The RE667W-R-PRO touchscreen displays event history and all opened, bypassed or troubled zones. The keypad is easy to install and the battery can be backed up with a direct wire option. The RE667W-R touchscreen keypad comes with a wall mount and a premium tabletop stand, giving you more flexibility to install where you want to in your home or business.

Like the Alula app, the slimline touchpad controls every Z-Wave smart device such as smartlocks, lights and thermostats. Whether you have an existing system or are installing a new Connect+ panel the slimline touchpad has you covered.

#Alula app manual full

Pair the wireless RE667W-R-PRO slimline touchpad with a BAT-Connect communicator to bring an old panel, and a house full of sensors back to life, or add it to the Connect+ Hub.

Make old systems new by upgrading the in-home control interface. The RE667W-R-PRO slimline keypad delivers real-time, at-a-glance control of video cameras, Z-Wave devices and every intrusion and environmental sensor. The Alula RE667W-R-PRO is an Connect+ encrypted wireless 7" touchscreen white alarm keypad with WiFi DeviceLink card that is designed for the Connect+ control panel or taking over existing security systems utilizing the BAT-Connect communicator.